LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Acura >> 2007 >> RL >> Repair and Diagnosis >> Engine Performance >> System >> Fuel Supply System >> Secondary Fuel Gauge Sending Unit Replacement
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Secondary Fuel Gauge Sending Unit Replacement

  1. Relieve the fuel pressure (see FUEL PRESSURE RELIEVING  ).
  2. Remove the fuel cap.
  3. Remove the rear seat cushion (see REAR SEAT REMOVAL/INSTALLATION ).
  4. Remove the access panel (A) from the right side of the floor.
    Fig 1: Identifying Secondary Fuel Gauge Sending Unit 5P Connector And Access Panel
    G05495271Courtesy of AMERICAN HONDA MOTOR CO., INC.
  5. Disconnect the secondary fuel gauge sending unit 5P connector (B).
  6. Remove the secondary fuel gauge sending unit (A).
    Fig 2: Secondary Fuel Gauge Sending Unit With Torque Specifications
    G05495272Courtesy of AMERICAN HONDA MOTOR CO., INC.
  7. Remove the fuel gauge sending unit (A).
    Fig 3: Identifying Fuel Gauge Sending Unit
    G05495273Courtesy of AMERICAN HONDA MOTOR CO., INC.
  8. Install the parts in the reverse order of removal with a new base gasket (B).
    NOTE: When installing the fuel gauge sending unit, make sure the connection is secure and the connector is firmly locked into place. Be careful not to bend or twist it excessively.
scientia non olet · About LEMON Manuals