LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Acura >> 2007 >> RL >> Repair and Diagnosis >> Engine Performance >> System >> PGM-FI System >> ECT Sensor 1 Replacement
April 5, 2026: LEMON Manuals is launched! Read the announcement.

ECT Sensor 1 Replacement

  1. Remove the engine cover (see step 1 under INTAKE MANIFOLD REMOVAL AND INSTALLATION ).
  2. Remove the air cleaner (see AIR CLEANER REMOVAL/INSTALLATION ).
  3. Disconnect the ECT sensor 1 connector (A).
    Fig 1: ECT Sensor 1 Connector And ECT Sensor With Torque Specifications
    G05494504Courtesy of AMERICAN HONDA MOTOR CO., INC.
  4. Remove ECT sensor 1 (B).
  5. Install the parts in the reverse order of removal with a new O-ring (C). Then refill the radiator with engine coolant (see COOLANT CHECK ).
scientia non olet · About LEMON Manuals