Power Seat Adjustment Switch Test/Replacement
WARNING: This page is about a different car, the 2008 Acura TL and 2007 Acura TL. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the power seat adjustment switch knobs (A) and recline cover from the driver's power seat (see FRONT SEAT DISASSEMBLY/REASSEMBLY ), then remove the two screws and the power seat switch.
- Disconnect the 12P connector from the power seat adjustment switch (B).
- Reinstall the adjustment switch knobs to the switch.
- Check for continuity between the terminals in each switch position according to the table.
- If the continuity is not as specified, replace the switch.