LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Acura >> 2007 >> RL >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission >> Input Shaft (Mainshaft) Speed Sensor Replacement
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Input Shaft (Mainshaft) Speed Sensor Replacement

  1. Disconnect the input shaft (mainshaft) speed sensor connector, and remove the input shaft (mainshaft) speed sensor (A).
    Fig 1: Input Shaft (Mainshaft) Speed Sensor And Sensor Washer With Torque Specifications
    G05495609Courtesy of AMERICAN HONDA MOTOR CO., INC.
  2. Install a new O-ring (B) on the new input shaft (mainshaft) speed sensor, then install the input shaft (mainshaft) speed sensor and sensor washer (C) in the transmission housing.
  3. Check the connector for rust, dirt, or oil, then connect the connector securely.
scientia non olet · About LEMON Manuals