Passenger's Power Window Switch Test/Replacement: Rear
- Remove the rear door panel and arm rest (see
FRONT DOOR WEATHERSTRIP REPLACEMENT
).
- Remove the screw and disconnect the connector (A) from the rear power window switch (B), then remove the switch assembly from the door panel.
Courtesy of AMERICAN HONDA MOTOR CO., INC.
- Remove the three mounting screws, then remove the rear power window switch from the switch panel (C).
- Swap the rear power window switch with another known-good switch and test. If the original rear power window switch is faulty; replace it.
- Install in the reverse order of removal.