Alternator Removal and Installation: Removal

Make sure you have the anti-theft codes for the audio system and the navigation system (if equipped).
Disconnect the negative cable from the battery.
Disconnect the A/C condenser fan motor connector (A) and the A/C compressor clutch connector (B), then remove the coolant reservoir (C).

Fig 1: Identifying A/C Condenser Fan Motor Connector And A/C Compressor Clutch Connector
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Remove the two upper bolts (D), loosen the lower bolt (E), then remove the A/C condenser fan shroud assembly.
Remove the drive belt (see DRIVE BELT INSPECTION ).
Disconnect the alternator connector (A) and the BLK wire (B) from the alternator.

Fig 2: Identifying Alternator Connector And BLK Wire From Alternator
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Remove the bolt (C) securing the harness bracket.
Remove the mounting bolt (A) and alternator bracket mounting bolt (B), then remove the alternator.

Fig 3: Identifying Mounting Bolt And Alternator Bracket Mounting Bolt
Courtesy of AMERICAN HONDA MOTOR CO., INC.