Fuel Tank Unit Removal and Installation: Removal

Relieve the fuel pressure (see FUEL PRESSURE RELIEVING ).
Remove the fuel fill cap.
Remove trunk floor trim panel (see TRIM REMOVAL/INSTALLATION - TRUNK AREA ).
Remove the access panel (A) from the floor.

Fig 1: Identifying Access Panel And Fuel Tank Unit 5P Connector
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Disconnect the fuel tank unit 5P connector (B).
Disconnect the quick-connect fittings (C) from the fuel tank unit.
Using the special tool, loosen the locknut (A).

Fig 2: Loosening Locknut With Torque Specifications
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Remove the locknut (A) and the fuel tank unit (B).

Fig 3: Identifying Locknut And Fuel Tank Unit
Courtesy of AMERICAN HONDA MOTOR CO., INC.