Low Fuel Indicator Test
- Do the gauge self-diagnostic function (see
SELF-DIAGNOSTIC FUNCTION
).
- If the low fuel indicator flashes, go to step 2.
- If the low fuel indicator does not flash, replace the gauge control module (see REWRITING THE ODO DATA ON A NEW GAUGE CONTROL MODULE ).
- Do the B-CAN system diagnosis Test Mode A troubleshooting (see
TROUBLESHOOTING - B-CAN SYSTEM DIAGNOSIS TEST MODE A
).
- If any DTCs are indicated, do the indicated DTC's troubleshooting.
- If no DTCs are indicated, go to step 3.
- Do the fuel gauge sending unit test (see FUEL GAUGE SENDING UNIT TEST ).