LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Acura >> 2007 >> TL Base >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission >> Transmission Gear Selection Switch Replacement
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Transmission Gear Selection Switch Replacement

  1. Remove the center console (see CENTER CONSOLE REAR SECTION REMOVAL/INSTALLATION ).
  2. Disconnect the transmission gear selection switch/ park pin switch/A/T gear position indicator panel light connector (A), then remove the connector from the shift lever bracket base.
    Fig 1: Identifying A/T Gear Position Indicator Panel Light Connector, Park Pin Switch And Lock Tabs
    G05459125Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Remove the A/T gear position indicator panel light bulb socket (B), then remove the bulb (C) from the socket.
  4. Remove the transmission gear selection switch/ park pin switch (D) by releasing the lock tabs (E).
  5. Install a new switch assembly in the shift lever bracket base.
  6. Install the bulb in the socket, then install the socket in the bracket base.
  7. Install the switch connector on the bracket base, then connect the connector.
  8. Install the center console (see CENTER CONSOLE REAR SECTION REMOVAL/INSTALLATION ).
scientia non olet · About LEMON Manuals