Passenger's Power Window Motor Test

Remove the passenger's door panel (see FRONT DOOR PANEL REMOVAL/INSTALLATION ).
Disconnect the 6P connector (A) from the power window motor.

Fig 1: Identifying Power Window Motor 6P Connector Terminal
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Test the motor by connecting battery power and ground according to the table. When the motor stops running, disconnect one lead immediately.

Fig 2: Battery Power And Ground Connection Terminal Chart
Courtesy of AMERICAN HONDA MOTOR CO., INC.

(): Left rear power window motor
If the motor does not run or fails to run smoothly, replace it.