Shift Lock Solenoid Replacement
- Remove the center console (see
CENTER CONSOLE REAR SECTION REMOVAL/INSTALLATION
).
- Release the tab (A) retaining the shift lock solenoid.
Courtesy of AMERICAN HONDA MOTOR CO., INC.
- Raise the shift lock solenoid bushing (B) just enough to slide the shift lock solenoid out.
- Install the shift lock solenoid plunger (C) and the plunger spring (D) in a new shift lock solenoid (E).
- Apply silicone grease to joint of the shift lock solenoid plunger, if necessary.
- Install a new shift lock solenoid by aligning the joint of the shift lock solenoid plunger with the tip of the shift lock stop (F).
- Install the center console (see
CENTER CONSOLE REAR SECTION REMOVAL/INSTALLATION
).