Passenger's Power Window Switch Test/Replacement

Remove the passenger's switch (A).
Front passenger's

Fig 1: Identifying Passenger's Switch Connector
Courtesy of AMERICAN HONDA MOTOR CO., INC.

Rear

Fig 2: Identifying Rear Passenger's Switch Connector
Courtesy of AMERICAN HONDA MOTOR CO., INC.

NOTE: The illustration shows the front passenger's door.

Fig 3: Identifying Front Passenger's Door Connector
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Check for continuity between the terminals in each switch position according to the table.

Fig 4: Front Passenger's Door Connector Continuity Chart
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Connect battery power to the No. 4 terminal and ground the No. 7 (or No. 8) terminal. The switch light should come on.
If the continuity or switch light tests is not as specified, remove the screws and replace the switch.
Install the switch in the reverse order of removal.