LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Acura >> 2009 >> CSX Base, Standard >> Repair and Diagnosis >> Engine Performance >> System >> PGM-FI System >> ECT Sensor 2 Replacement
April 5, 2026: LEMON Manuals is launched! Read the announcement.

ECT Sensor 2 Replacement

  1. Drain the engine coolant (see COOLANT CHECK ).
  2. Remove the splash shield.
  3. Disconnect ECT sensor 2 connector (A), then remove ECT sensor 2 (B).
    Fig 1: ECT Sensor 2 Connector With Torque Specifications
    G06264640Courtesy of AMERICAN HONDA MOTOR CO., INC.
  4. Install the parts in the reverse order of removal with a new O-ring (C).
  5. Install the splash shield.
  6. Refill the radiator with engine coolant (see COOLANT CHECK ).
scientia non olet · About LEMON Manuals