LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Acura >> 2009 >> MDX >> Repair and Diagnosis >> Engine Performance >> System >> PGM-FI System >> DTC Troubleshooting >> DTC P060A: PCM (A/T system) Internal Control Module Malfunction
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC P060A: PCM (A/T system) Internal Control Module Malfunction

NOTE: Before you troubleshoot, record all freeze data and any on-board snapshot, and review the general troubleshooting information (see GENERAL TROUBLESHOOTING INFORMATION ).
  1. Turn the ignition switch ON (II).
  2. Clear the DTC with the HDS.
  3. Check for Temporary DTCs or DTCs with the HDS.

    Is DTC P060A indicated? 

    YES  - Go to step 4.

    NO  - Intermittent failure, the system is OK at this time.

  4. Update the PCM if it does hot have the latest software (see PCM UPDATE ), or substitute a known-good PCM (see SUBSTITUTING THE PCM ).
  5. Check for Temporary DTCs or DTCs with the HDS.

    Is DTC P060A indicated? 

    YES  - If the PCM was updated, substitute a known-good PCM (see SUBSTITUTING THE PCM ), then recheck. If the PCM was substituted, go to step  1.

    NO  - If the PCM was updated, troubleshooting is complete; If the PCM was substituted, replace the original PCM (see PCM REPLACEMENT  ). If any other Temporary DTCs or DTCs are indicated, go to the indicated DTCs troubleshooting.

scientia non olet · About LEMON Manuals