Audio System
- Component Location Index
- Symptom Troubleshooting Index
- System Description
- Overview
- Bluetooth Audio
- How to play the Bluetooth Audio
- Audio Unit Connector for Inputs and Outputs
- Stereo Amplifier Connector for Inputs and Outputs
- XM Receiver Connector for Inputs and Outputs (With XM receiver)
- Active Noise Cancellation Unit Connector for Inputs and Outputs
- Active Noise Cancellation Microphone Connector for Inputs and Outputs
- Audio-HVAC Subdisplay Unit Connector for Inputs and Outputs
- Auxiliary Jack Assembly Connector for Inputs and Outputs
- USB Adapter Unit for Inputs and Outputs
- Circuit Diagram
- Self-diagnostic Function
- Notes
- How to Use the Audio System Self-diagnostic Function
- How to exit the self-diagnosis mode
- How to Obtain the Audio Unit Serial Number
- LCD lighting mode
- LCD lights-out mode
- LCD back-up light lighting/lights-out mode
- Climate control system communication check mode
- Audio amplifier communication check mode
- Active Noise Cancellation (ANC) system check mode
- How to check the active noise cancellation system in this check mode
- Error Codes
- Symptom Troubleshooting
- Poor AM or FM radio reception or interference
- Audio unit power switch will not turn on (No information display and no sound)
- Audio unit power switch will not turn off
- No sound is heard from the speaker(s) (display is normal)
- Audio system sound is weak or distorted (display is normal)
- Radio preset memory is lost
- Volume does not change
- Radio tuner does not change stations
- Audio unit button illumination does not work
- Audio remote switch does not work properly
- Audio disc does not load
- Audio disc does not eject
- Audio disc changer does not load all six discs
- Audio disc changer does not move between discs
- Audio disc does not play
- Audio disc skips
- Booming sound while driving with audio unit on or off
- USB device does not function
- There is no sound from the left speaker when the USB device is connected
- There is no sound from the right speaker when the USB device is connected
- Error code: XM NO SIGNAL is displayed
- Error code: XM ANTENNA is displayed
- XM radio display is blank and no station information is displayed (with AcuraLink)
- XM radio display is blank and no station information is displayed (without AcuraLink)
- XM radio preset memory is lost (with AcuraLink)
- XM radio preset memory is lost (without AcuraLink)
- Poor or no sound with XM radio (Audio unit does display XM channels)
- Sound Quality Diagnosis
- Audio Unit Removal/Installation
- Audio-HVAC Subdisplay Unit Removal/Installation
- Speaker Test/Replacement
- Stereo Amplifier Removal/Installation
- AcuraLink Control Unit (XM Receiver) Removal/Installation
- XM Receiver Removal/Installation
- Auxiliary Jack Assembly Replacement
- Active Noise Cancellation Unit Removal/Installation
- Active Noise Cancellation Microphone Removal/Installation
- USB Adapter Unit Replacement
- USB Jack Replacement
- Audio Remote Switch Test
- AM/FM Antenna Amplifier Replacement
- XM Antenna Replacement
- AM/FM Antenna Repair