LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Acura >> 2009 >> RL >> Repair and Diagnosis >> Body & Frame >> Seats >> Driver Position Memory System (DPMS) >> Power Tilt/Telescopic Steering Switch Test/Replacement
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Power Tilt/Telescopic Steering Switch Test/Replacement

  1. Remove the driver's dashboard undercover (see DRIVER'S DASHBOARD LOWER COVER REMOVAL/INSTALLATION ), and the driver's dashboard lower cover (see DRIVER'S DASHBOARD LOWER COVER REMOVAL/INSTALLATION ), then remove the steering column covers (see STEERING COLUMN REMOVAL AND INSTALLATION ).
  2. Disconnect the 13P connector (A) from the power tilt/telescopic steering switch (B).
    Fig 1: Identifying Power Tilt And Telescopic Steering Switch Connector Terminal
    G06160981Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Check for continuity between the terminals in each switch position according to the table.
    Fig 2: Continuity Chart
    G06160982Courtesy of AMERICAN HONDA MOTOR CO., INC.
  4. If the continuity is not as specified, replace the switch.