LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Acura >> 2009 >> TL Base >> Repair and Diagnosis >> Engine Performance >> System >> Fuel Supply System >> Fuel Pressure Regulator Replacement >> Without SH-AWD
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Without SH-AWD

  1. Remove the fuel tank unit (see FUEL TANK UNIT REMOVAL AND INSTALLATION )
  2. Remove the reservoir (A)
    Fig 1: Identifying Reservoir, Bracket And Fuel Pressure Regulator
    G05990420Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Remove the bracket (B)
  4. Remove the fuel pressure regulator (C) and the backup ring (D)
  5. Install the parts in the reverse order of removal with new O-rings (E) and a new bracket When installing the fuel tank unit, align the marks on the fuel tank unit and the fuel tank (see INSTALLATION (WITHOUT SH-AWD) )
NOTE:
  • Coat the O-rings with clean engine oil, do not use any other type oils or fluids
  • Do not pinch the O-rings during installation
  • Use all the new parts supplied in the pressure regulator replacement kit
scientia non olet · About LEMON Manuals