Memorized Position Recall with the Remotes
WARNING: This page is about a different car, the 2008 Acura TSX, 2007 Acura TSX, 2006 Acura TSX, 2005 Acura TSX, and 2004 Acura TSX. However, it is still accessible from the selected car via links, so may be relevant.
Make sure that the remotes are LINKED. Press and hold the LOCK and UNLOCK button at the same time. The red LED on the remote will flash ONE time when the remote has been LINKED, and will flash TWO times when the remote has been UNLINKED. After the seat position has been memorized, the seat will move to the position when the remote UNLOCK is pressed and the driver's door is opened. When the seat gets to the memorized position, the LED corresponding with that remote will stay lit until the position is changed or the key is turned OFF.