Rear Power Window Switch Test
- Remove the rear window switch (see
FRONT PASSENGER'S POWER WINDOW SWITCH REPLACEMENT ), and disconnect the 14P connector from the switch
- Test the rear power window switch
- When the power is connected to the No 2 terminal and ground is connected to the No 14 terminal There should be continuity between the No 8 and No 1 terminals
- When the power is connected to the No 6 terminal and ground is connected to the No 14 terminal There should be continuity between the No 8 and No 7 terminals
- When the power is connected to the No 8 terminal and ground is connected to the No 14 terminal, then push the rear power window switch to DOWN There should be continuity between the No 8 and No 1 terminals
- When the power is connected to the No 8 terminal and ground is connected to the No 14 terminal, then pull the rear power window switch to UP There should be continuity between the No 8 and No 7 terminals
Courtesy of AMERICAN HONDA MOTOR CO., INC.
- If the continuity is not as specified, replace the switch