Passenger's Power Window Switch Test/Replacement

Remove the passenger's door armrest (see FRONT DOOR PANEL REMOVAL/INSTALLATION ).
Disconnect the 10P (or 14P)* connector (A) from the passenger's power window switch (B).
* : Rear power window switch

Front Passenger's

Fig 1: Identifying Power Window Switch - Front Passenger's
Courtesy of AMERICAN HONDA MOTOR CO., INC.

Rear

Fig 2: Identifying Rear Power Window Switch
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Remove the three screws and the switch.
Swap the power window switch with another known-good switch and test. If the original window switch is faulty; replace it.
Install the switch in the reverse order of removal.
After replacement, reset the power window control unit (see RESETTING THE POWER WINDOW CONTROL UNIT ).