LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Acura >> 2011 >> RL >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Electronic Throttle Control System >> Accelerator Pedal Module Removal/Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Accelerator Pedal Module Removal/Installation

  1. Disconnect the accelerator pedal position (APP) sensor 6P connector (A).
    Fig 1: Accelerator Pedal Position (App) Sensor 6P Connector With Torque Specifications
    G07353846Courtesy of AMERICAN HONDA MOTOR CO., INC.
  2. Release the lock tab on the base of the accelerator pedal, then remove the accelerator pedal module (B).
    NOTE: The APP sensor is not available separately. Do not disassemble the accelerator pedal module.
  3. Install the parts in the reverse order of removal.
scientia non olet · About LEMON Manuals