Automatic Transmission
AUTOMATIC TRANSMISSION TORQUE SPECIFICATIONS
| Location | Item | Remark | Torque |
|---|---|---|---|
| Automatic transmission | ATF drain plug | Use new sealing washer | 49 N.m (5.0 kgf.m, 36 lbf.ft) |
| ATF filler bolt | Use new sealing washer | 44 N.m (4.5 kgf.m, 32 lbf.ft) | |
| Clutch pressure inspection port sealing bolts (line/1st/5th/torque converter) | Use new sealing bolt | 20 N.m (2.0 kgf.m, 14 lbf.ft) | |
| Clutch pressure inspection port sealing bolts (3rd/6th) | Use new sealing washer | 27 N.m (2.8 kgf.m, 20 lbf.ft) | |
| Drive plate bolts*2 | 74 N.m (7.5 kgf.m, 54 lbf.ft) | ||
| Line pressure switch | Use new sealing washer | 20 N.m (2.0 kgf.m, 14 lbf.ft) | |
| Shift cable end nut | 22 N.m (2.2 kgf.m, 16 lbf.ft) | ||
| Shift lever bracket bolts | 22 N.m (2.2 kgf.m, 16 lbf.ft) | ||
| Transfer fluid drain plug | Use new sealing washer | 44 N.m (4.5 kgf.m, 33 lbf.ft) | |
| Transfer fluid filler plug | Use new sealing washer | 44 N.m (4.5 kgf.m, 33 lbf.ft) | |
| Transfer assembly bolts | 51 N.m (5.2 kgf.m, 38 lbf.ft) | ||
| Transmission fluid pressure switches | Use new sealing washer | 20 N.m (2.0 kgf.m, 14 lbf.ft) | |
| Transmission ground terminal blacket bolt | 26 N.m (2.7 kgf.m, 20 lbf.ft) | ||
| Transmission housing mounting bolts (upper) | 74 N.m (7.5 kgf.m, 54 lbf.ft) | ||
| Transmission housing mounting bolts (lower) | 64 N.m (6.5 kgf.m, 47 lbf.ft) |
NOTE:
- Refer to the service information for the precautions and complete procedures.
- Refer to the service information for the bolts/nuts not indicated here.
*1: Parts to be tightened in a particular order.
*2: Follow the service information procedures closely for torque, sequence, and special steps.