Fuel Fill Pipe Removal/Installation

Dram the fuel tank (see FUEL TANK DRAINING )
Remove the left rear wheel
Remove the fuel fill pipe cover (A)

Fig 1: Identifying Fuel Fill Pipe Cover
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Disconnect the fuel fill tube
- Without SH-AWD Disconnect the quick-connect fitting (A), and disconnect the fuel fill tube (B) from the fuel fill pipe by sliding back the clamp On the fuel fill tube, then twist the hose as you pull to avoid damaging the hose or pipe
- With SH-AWD Disconnect the quick-connect fittings (A) (see WITH SH-AWD )
Without SH-AWD

Fig 2: Identifying Quick-Connect Fitting And Fuel Fill Tube (Without SH-AWD)
Courtesy of AMERICAN HONDA MOTOR CO., INC.

With SH-AWD

Fig 3: Identifying Quick-Connect Fitting And Fuel Fill Tube (With SH-AWD)
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Remove the fuel fill pipe (A)

Fig 4: Identifying Fuel Fill Pipe
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Install the parts in the reverse order of removal

NOTE: Before connecting the fuel fill pipe and the quick-connect fitting, check for dirt, and clean it if needed, taking care not to damage the fuel fill pipe and other parts