Fuel Pump/Fuel Gauge Sending Unit Replacement

Remove the fuel tank unit, without SH-AWD system (see FUEL TANK UNIT REMOVAL AND INSTALLATION ), with SH-AWD system (see REMOVAL (WITH SH-AWD) )
Remove the fuel level sensor (fuel gauge sending unit) (A) from the fuel tank unit (B)
Without SH-AWD

Fig 1: Identifying Fuel Pump Components (Without SH-AWD)
Courtesy of AMERICAN HONDA MOTOR CO., INC.

With SH-AWD

Fig 2: Identifying Fuel Pump Components (With SH-AWD)
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Check these items before installing the fuel tank unit
- When connecting the wire harness, make sure the connection is secure and the connector (C) is firmly locked into place
- When installing the fuel gauge sending unit, make sure the connection is secure Be careful not to bend or twist it excessively
Install the parts in the reverse order of removal When installing the fuel tank unit, align the marks on the unit and the fuel tank, without SH-AWD system (see INSTALLATION (WITHOUT SH-AWD) ), with SH-AWD system (see INSTALLATION (WITH SH-AWD) )