Shift Lock Solenoid Test
- Connect the HDS to the DLC (A) located under the driver's side of the dashboard
Courtesy of AMERICAN HONDA MOTOR CO., INC.
- Turn the ignition switch to ON (II), or press the engine start/stop button to select the ON mode Make sure the HDS communicates with the PCM If it does not, go to the DLC circuit troubleshooting (see
DLC CIRCUIT TROUBLESHOOTING
)
- Select Shift Lock Solenoid Test in the Miscellaneous Test Menu, and check that the shift lock solenoid operates with the HDS
- Check that the shift lever can be moved out of P when the Shift Lock Solenoid is ON Move the shift lever back to P, and check that it locks with the Shift Lock Solenoid is OFF
- Check that the shift lock releases when the shift lock release is pushed, and check that it locks when the shift lock release is released
- If the shift lock solenoid does not work properly, go to the shift lock system troubleshooting (see
SHIFT LOCK SYSTEM CIRCUIT TROUBLESHOOTING )