DTC P16C0: PCM A/T Control System Incomplete Update
NOTE:
- Before you troubleshoot, record all freeze data and any on-board snapshot with the HDS, and review the GENERAL TROUBLESHOOTING INFORMATION
- This code is indicated when PCM updating is incomplete.
- Do not turn the ignition switch to LOCK (0) or ACCESSORY (I) while updating the PCM. If you turn the ignition switch to LOCK (0) or ACCESSORY (I) before completion, the PCM can be damaged.
- Update the PCM (see KNOCK SENSOR REPLACEMENT ).
- Check for Pending or Confirmed DTCs with the HDS.
Is DTC P16C0 indicated?
YES -Replace the PCM (see PCM REPLACEMENT ).
NO -PCM updating is complete.