LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Acura >> 2012 >> RL >> Repair and Diagnosis >> Engine Performance >> System >> PGM-FI System >> ECT Sensor 2 Replacement
April 5, 2026: LEMON Manuals is launched! Read the announcement.

ECT Sensor 2 Replacement

  1. Remove the splash shield (see SPLASH SHIELD REPLACEMENT ).
  2. Drain the engine coolant (see COOLANT REPLACEMENT ).
  3. Disconnect the ECT sensor 2 connector (A).
    Fig 1: Disconnecting ECT Sensor 2 Connector With Torque Specifications
    G07362069Courtesy of AMERICAN HONDA MOTOR CO., INC.
  4. Remove ECT sensor 2 (B).
  5. Install the parts in the reverse order of removal with a new O-ring (C), then refill the radiator with engine coolant (see COOLANT CHECK ).
scientia non olet · About LEMON Manuals