LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Acura >> 2012 >> TL Base >> Repair and Diagnosis >> Brakes >> Traction Control >> VSA System Components >> General Troubleshooting Information >> How to Clear DTCs
April 5, 2026: LEMON Manuals is launched! Read the announcement.

How to Clear DTCs

  1. With the ignition switch in LOCK (0), or vehicle in OFF mode, connect the HDS to the data link connector (DLC) under the driver's side of the dashboard.
  2. Turn the ignition switch to ON (II), or press the engine start/stop button to select the ON mode.
  3. Make sure the HDS communicates with the vehicle and the VSA modulator-control unit. If it does not, go to the DLC circuit troubleshooting (see DLC CIRCUIT TROUBLESHOOTING ).
  4. Clear the DTC(s) by following the screen prompts on the HDS.
  5. Turn the ignition switch to LOCK (0), or press the engine start/stop button to select the OFF mode.
scientia non olet · About LEMON Manuals