Blind Spot Information System
- Special Tools
- Component Location Index
- General Troubleshooting Information
- Blind Spot Information System (BSI) Indicator
- Blind Spot Information System (BSD) Alert Indicator
- BSI OFF Switch
- Multi-Information Display (MID) Indication
- BSI Off/BSI On
- Clean the BSI Radar Units
- Self-Diagnostic Function
- Blind Spot Information System (BSI) Control Unit
- Blind Spot Information System (BSI) Radar Units
- CAN Communication
- How to Troubleshoot DTCs
- How to Retrieve DTCs
- How to Clear DTCs
- DTC Troubleshooting Index
- Symptom Troubleshooting Index
- System Description
- Circuit Diagram
- DTC Troubleshooting
- DTC B18A1: BSI Control Unit Internal Circuit Error
- DTC B18A5: Left BSI Radar Unit Temperature High
- DTC B18A6: Right BSI Radar Unit Temperature High
- DTC B18A7: Left BSI Radar Unit Voltage Input Low
- DTC B18A8: Right BSI Radar Unit Voltage Input Low
- DTC B18A9: Left BSI Radar Unit Voltage Input High
- DTC B18AA: Right BSI Radar Unit Voltage Input High
- DTC B18AF: Left BSI Radar Unit Internal Circuit Error
- DTC B18B1: Right BSI Radar Unit Internal Circuit Error
- DTC B18B4: Left BSI Radar Unit Dirty
- DTC B18B5: Right BSI Radar Unit Dirty
- DTC B18B6: Lost Communication With Left BSI Radar Unit; DTC B18B7: Lost Communication With Right BSI Radar Unit
- DTC B18B8: Left BSI Radar Unit Azimuth Off Alignment; DTC B18B9: Right BSI Radar Unit Azimuth Off Alignment
- DTC B18BA: Left BSI Radar Unit Version Incorrect; DTC B18BB: Right BSI Radar Unit Version Incorrect
- DTC B18BC: BSI Radar Units Communication Error
- DTC B18BD: BSI Control Unit Voltage Input High
- DTC B18BE: BSI Control Unit Voltage Input Low
- DTC B18C2: Left BSI Alert Indicator Output Error
- DTC B18CF: Right BSI Alert Indicator Output Error
- DTC U0155: Lost Communication With the Gauge Control Module
- DTC U0423: Invalid Data Received from PCM (Vehicle Speed Data)
- DTC U1280: Communication Bus Line Error (BUS-OFF)
- Symptom Troubleshooting
- The BSI alert indicator comes on when no other vehicle is in the detectable area (Wrong indication)
- The BSI does not come on when other vehicles are in the detectable area (No indication)
- The BSI OFF switch does not work
- The BSI indicator does not go off, or does not come on
- The MID beeper does not sound when the BSI OFF switch is pushed
- The HDS does not communicate with the BSI
- BSI Radar Unit Removal/Installation
- BSI Control Unit Removal/Installation
- BSI Alert Indicator Removal/Installation
- BSI OFF Switch Test/Removal/Installation
- BSI Radar Unit Aiming Inspection
- BSI Radar Unit Mounting Area Check