LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Acura >> 2012 >> TL Base >> Repair and Diagnosis >> Engine Performance >> System >> Fuel And Emissions Systems >> How to Set Readiness Codes >> Enable Criteria >> Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Enable Criteria: Procedure

  1. Connect the HDS to the DLC.
  2. Start the engine.
  3. Select the EVAP TEST in the INSPECTION MENU with the HDS, then select the FUNCTION TEST in the EVAP TEST MENU.
    • If the result is normal, readiness is complete.
    • If the result is not normal, go to the next step.
  4. Check for a Pending DTC. If there is no DTC, one or more of the enable criteria were probably not met; repeat the procedure.
scientia non olet · About LEMON Manuals