LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Acura >> 2012 >> TL Base >> Repair and Diagnosis >> Engine Performance >> System >> PGM-FI System >> DTC Troubleshooting >> DTC P062F: ECM/PCM Internal Control Module Keep Alive Memory (KAM) Error
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC P062F: ECM/PCM Internal Control Module Keep Alive Memory (KAM) Error

NOTE: Before you troubleshoot, record all freeze data and any on-board snapshot, and review the general troubleshooting information (see GENERAL TROUBLESHOOTING INFORMATION ).
  1. Turn the ignition switch to ON (II), or press the engine start/stop button to select the ON mode.
  2. Clear the DTC with the HDS.
  3. Check for Pending or Confirmed DTCs with the HDS.

    Are any Pending or Confirmed DTCs indicated? 

    YES  - Go to step 4.

    NO  - Intermittent failure, the system is OK at this time. ■

  4. Update the ECM/PCM  if it does not have the latest software (see ECM/PCM Update ), or substitute a known-good ECM/PCM (see SUBSTITUTING THE ECM/PCM ).
  5. Check for Pending or Confirmed DTCs with the HDS.

    Is DTC P062F indicated? 

    YES  - If the ECM/PCM was updated, substitute a known-good ECM/PCM (see SUBSTITUTING THE ECM/PCM ), then recheck. If the ECM/PCM was substituted, go to step  1.

    NO  - If the ECM/PCM was updated, troubleshooting is complete. If the ECM/PCM was substituted, replace the original ECM/PCM  (see ECM/PCM Replacement ). If any other Pending or Confirmed DTCs are indicated, go to the indicated DTC's troubleshooting. ■

scientia non olet · About LEMON Manuals