PCM/TCM Reset
NOTE:
To reset the PCM/TCM, initialize only the automatic transmission memory stored in the PCM or the TCM.
- Select the A/T system with the HDS.
- Reset the PCM/TCM with the HDS while the engine is stopped.
- Turn the ignition switch to LOCK (0), or press the engine start/stop button to select the OFF mode.
- Turn the ignition switch to ON (II), or press the engine start/stop button to select the ON mode, and wait for 30 seconds.
- Turn the ignition switch to LOCK (0), or press the engine start/stop button to select the OFF mode, and disconnect the HDS from the DLC.