Memorizing a Seat, Mirror, and Steering Position

Move the seat, the mirrors, and the steering to the desired position. Turn the ignition switch to ON (II), or press the engine start/stop button to select the ON mode.

Press and hold the SET button on the driver's position memory switch. A single beep is heard and both of the green LEDs will begin to flash. Press No. 1 or No. 2 to match the remote that is to be used. There are two more beeps confirming that the seat, the mirror, and the steering positions are memorized. The green LEDs remains lit, unless the seat and the mirrors are moved from the memorized position.