OBD Status

The OBD status shows the current system status of each DTC and all of the parameters. This function is used to see if the repair was successfully completed. The results of diagnostic tests for the DTC are displayed as:

• PASSED: The on board diagnosis is successfully finished.
• FAILED: The on board diagnosis has finished but failed.
• EXECUTING: The vehicle is in enable criteria conditions of the DTC, and the on board diagnosis is running.
• NOT COMPLETED: The on board diagnosis was running but is out of the enable conditions of the DTC.
• OUT OF CONDITION: The vehicle has stayed out of the enable conditions of at the DTC.