Air Cleaner Element Inspection/Replacement

Open the air cleaner housing cover (A).

Fig 1: Air Cleaner Housing, Element And Cover With Torque Specifications
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Remove the air cleaner element (B) from the air cleaner housing (C).
Check the air cleaner element for damage or clogging. If it is damaged or clogged, replace it.
NOTE: Do not use compressed air to clean the air cleaner element.
Clean and remove any debris from inside the air cleaner housing.
Install the parts in the reverse order of removal.

If you did not replace the air cleaner element, this procedure is complete.
If the Maintenance Minder required air cleaner element replacement, reset the Maintenance Minder (see MAINTENANCE MINDER™ ).
If the idle speed fluctuates, do the idle speed inspection (see ECM/PCM IDLE LEARN PROCEDURE ).