Power Window Switch Test: Test
How to use this service information .
NOTICE:
When working with a vehicle equipped with the electronic air suspension, be sure to set it to the leveling off mode to prevent unexpected operation. Refer to the Electronic Air Suspension System Service Precautions - Refer to: Electronic Air Suspension System Connector Fitting Precautions or Electronic Air Suspension System Service Precautions for the procedure.
If the door control unit is replaced, reset the power window control unit . If the original door control unit is installed, confirm that the power window works properly.
Power Window Master Switch
- Driver's Power Window Switch - Test
Preconditions
Figure 1
Figure 2
Procedure/Specifications
- Check the switch according to the table. (Figure 1 and 2)
Result
- If the result is not as specified, replace the power window master switch .
After Inspection
Front Passenger's Power Window Switch
- Front Passenger's Power Window Switch - Test
Preconditions
Procedure/Specifications
- Check the switch according to the table. (Figure 1 and 2)
Figure 1
Figure 2
Result
- If the result is not as specified, replace the front passenger's power window switch .
After Inspection
Rear Power Window Switch
- Rear Power Window Switch - Test
Preconditions
Procedure/Specifications
- Check the switch according to the table. (Figure 1 and 2)
Figure 1
Figure 2
Result
- If the result is not as specified, replace the rear power window switch .
After Inspection