Body Control Module Inspection
Preconditions
NOTE:
This procedure can be done before any other inspections are completed because this test procedure includes all of the following inspection items. However, if this test fails, it will be necessary to continue with each inspection item individually to determine which item failed.
- External circuit is normal
Test Procedure
- Preparation
-
- Rear interior LF antenna connector (2P): disconnected
- Procedure
-
- Perform the inspection according to the following table.
(Disconnected) Rear interior LF antenna connector (2P) female terminals
IG Mode
Normal Conditions
Module internal circuit inspection
ON*1
Voltage
*1: If the matter whether the vehicle mode ON or OFF (LOCK) because of the permanent power supply.
Results
- If it is abnormal, there is a problem with the body control module.