Body Control Module Inspection

NOTICE:

Before Disconnecting The SRS Unit Connector, Do The 12 Volt Battery Terminal Disconnection Procedure And Wait For At Least 3 Minutes.

Preconditions

NOTE:

This Procedure Can Be Done Before Any Other Inspections Are Completed Because This Test Procedure Includes All Of The Following Inspection Items. However, If This Test Fails, It Will Be Necessary To Continue With Each Inspection Item Individually To Determine Which Item Failed.

External Circuit Is Normal

Test Procedure

Preparation
- -
  SRS Unit Connector A (43P): Disconnected
Procedure
- -
  Perform The Inspection According To The Following Table.

(Connected)Body Control Module Connector B (66P) female Terminals

IG Mode

Courtesy of HONDA, U.S.A., INC.

Normal Conditions

Body Control Module Output Voltage Inspection

Off

12 V Battery Voltage

Results

If It Is Abnormal, There Is A Problem With The Body Control Module.