Fuel Injectors & Resistors
- Connect tachometer to engine. Start engine and run at idle. Remove harness connector from injectors one at a time. Engine idle speed should drop 100-300 RPM as each injector is disconnected. If engine idle speed does not drop, check the wiring connector, injector resistance or injection signal from the computer.
- Disconnect electrical connector from each injector. Measure injector resistance. See INJECTOR RESISTANCE SPECIFICATIONS table. If injector not to specification, replace injector.
INJECTOR RESISTANCE SPECIFICATIONS
| Application | Ohms |
|---|---|
| Alfa Romeo (All Models) | 2-3 |