Fuel Injectors
- Remove injectors but leave hoses connected. Place injectors in individual measuring containers. With sensor plate in idle position, connect jumper wire in place of fuel pump relay.
- Disconnect fuel pump when measuring container with highest level of fuel reaches specified capacity. See Audi Fuel Injector Specifications table.
- Compare amounts of fuel in measuring containers. Fuel should not vary by more than specified amount. Repeat test with sensor plate in full throttle position.
AUDI FUEL INJECTOR SPECIFICATIONS
| Application | Fuel Capacity: Oz. (cc) |
|---|---|
| Idle | .58-.78 (17-23) |
| Full Throttle | 2.43-2.98 (72-88) |