Removal & Installation
WARNING: This page is about the 5000 S, 4D Sedan, 2.2 B, Automatic, which is a different variant/trim than selected.
| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|---|---|---|---|
| Normally Aspirated | 5.6 | C | ||
| Combination Procedure: CONVERTER: Drain & Test: | ||||
| 0.2 | C | |||
| Combination Procedure: CONVERTER SEAL: Remove & Replace: | ||||
| 0.3 | B | |||
| Combination Procedure: CRANKSHAFT MAIN OIL SEAL: Remove & Replace: | ||||
| Rear | 0.5 | B | ||
| Combination Procedure: FLYWHEEL: Remove & Replace: | ||||
| 0.2 | C | |||
| Combination Procedure: OIL PUMP: Overhaul Removed: | ||||
| Front Pump | 0.5 | B | ||
| Combination Procedure: OIL PUMP: Remove & Replace: | ||||
| 0.7 | B | |||
| Combination Procedure: PINION SHAFT SEAL: Remove & Replace: | ||||
| Front | 0.7 | B | ||
| Rear | 0.5 | B | ||
| Combination Procedure: TORQUE CONVERTER: Remove & Replace: | ||||
| 0.1 | C | |||
| Combination Procedure: TRANSMISSION ASSEMBLY: Replace: | ||||
| 0.6 | C | |||