LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Audi >> 1987 >> 5000 CS, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> BOSCH Cis-E System >> Removal & Installation >> Fuel Distributor >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Fuel Distributor: Installation

  1. Lightly lubricate new sealing "O" ring and mount on fuel distributor. Install fuel distributor. Ensure "O" ring is not damaged or air leaks will result. Connect all fuel lines except those to fuel injectors. Check sensor plate adjusting lever and fuel distributor control piston for smooth operation.
  2. Remove fuel pump relay and bridge fuel pump circuit. Use Jumper Switch (US 4480/3) in place of fuel pump relay. When pressure has built up, turn off fuel pump. Move sensor plate from rest position to end of travel.
  3. Uniform resistance should be felt during entire movement. No resistance should be felt on quick return to rest position. Connect injector lines. Install fuel pump relay. Start engine and check complete fuel system for leaks.
scientia non olet · About LEMON Manuals