LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Audi >> 1988 >> 5000 CS, Standard >> Repair and Diagnosis >> Engine Performance >> Ignition System >> Testing >> Spark Plug Wires & Rotor
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Spark Plug Wires & Rotor

  1. Check coil wire resistance. If radio supression wires are used, reading should be 1200-2800 ohms. If not, reading should be zero ohms.
  2. Check resistance of spark plug wires. If radio supression wires are used, reading should be 4600-7400 ohms. If not, reading should be 600-1400 ohms. Check spark plug connectors. If radio suppression connectors are used, reading should be 4000-6000 ohms. If not, reading should be 600-1400 ohms.
  3. Check rotor and spark plug wire distributor cap connectors. Resistance should be 600-1400 ohms. Ensure rotor is marked "R1".
scientia non olet · About LEMON Manuals