LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Audi >> 1988 >> 80 Base, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> BOSCH Cis MOTRONIC System >> Component Testing >> Full Throttle Switch
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Full Throttle Switch

  1. Connect multimeter between terminal No. 3 of throttle switch and ground. Switch multimeter to voltage range. Turn ignition on. Multimeter should read battery voltage. Fasten pointer for Protractor (3084 ) to adjuster for accelerator cable (using a rubber band).
  2. Screw protractor onto throttle shaft and unscrew throttle shaft nut (if necessary). Push throttle lever to full open (at stop limit) and zero pointer plus disc.