Removal & Installation

Includes: R&I only those components necessary for the removal of the complete Engine Assembly. DOES NOT include transfer components or tune Engine. DOES NOT include alignment.

Applies To	Note	Standard Hours	Warranty Hours	Skill Level
		6.5		C
Combination Procedure: CLUTCH PILOT BEARING: Remove & Replace:
		0.8		C
Combination Procedure: CLUTCH PRESSURE PLATE: Remove & Replace:
		0.5		C
Combination Procedure: CLUTCH RELEASE BEARING: Remove & Replace:
		0.2		C
Combination Procedure: CRANKSHAFT MAIN OIL SEAL: Remove & Replace:
Automatic Trans, Rear		0.5		B