LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Audi >> 1989 >> 90 Base, Standard >> Repair and Diagnosis >> Engine Performance >> System >> Basic Testing >> Ignition Checks >> Cis Digital Control >> Tachometer Signal Output
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Tachometer Signal Output

  1. Peel back ECU connector boot. Attach a voltmeter positive lead to ECU terminal No. 7. Attach negative lead to any good ground. Start engine and check for a steady voltage increase as RPM is increased.
  2. If engine does not run, check engine speed sensors. If engine runs, but voltage does not increase, replace ECU. If voltage increased, but vehicle tachometer did not respond, check wiring between ECU terminal No. 7 and tachometer. If okay, repair or replace tachometer.
scientia non olet · About LEMON Manuals