LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Audi >> 1990 >> 100 Base, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Basic Testing >> Ignition Checks >> Cis-E III >> Secondary Resistance
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Secondary Resistance

  1. Check wiring between power stage and ignition coil, and power stage ground wire for corrosion and damage. On version one, disconnect ignition coil power stage connector and ignition coil wire. See Figure .
  2. On version 2, disconnect ignition coil power stage connector and remove screw from top of assembly. See Figure . On both versions, connect Multimeter (US 1119) between terminal No. 1 and coil wire socket.
  3. Resistance should be 5000-6000 ohms. If resistance is not as specified, replace ignition coil.
scientia non olet · About LEMON Manuals