LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Audi >> 1990 >> 100 Base, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - System/Component Tests >> Air Induction System >> Turbocharger >> Vibration Or Noise
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Vibration Or Noise

  1. Inspect for defective bearings or interference of rotating parts with related objects. Consider neglect of engine oil change or sustained use with contamination in oil pipe. Check for restricted or broken oil filter. Check for repeated abrupt starts and stops that could cause bearing failure.
  2. If there is no problem with lubricating system, check for incorrect balance of rotating section or bent shaft. Conditions may be due to excessive wear of bearings or contamination, causing damage to turbine or compressor wheels.
  3. If any of the above mentioned conditions exist, replace turbocharger assembly. Before installing a new turbocharger assembly, thoroughly check intake manifold system for contamination and/or broken turbine or compressor wheel pieces.
scientia non olet · About LEMON Manuals