Wheel Alignment Specifications (100, 200)
NOTE:
Ride height between left and right side of vehicle should vary less than 1" (25.4 mm).
WHEEL ALIGNMENT SPECIFICATIONS
| Application | Fraction | Decimal | |||||||
|---|---|---|---|---|---|---|---|---|---|
| 100 & 200 Turbo | |||||||||
| Camber (Degrees) | |||||||||
| Front | 1/2 ± 1/2 | .500 ± .500 | |||||||
| Rear (1) | |||||||||
| Before VIN No. 44 JN 201 030 | 5/8 ± 1/2 | .625 ± .500 | |||||||
| After VIN No. 44 JN 201 031 | 7/8 ± 1/2 | .825 ± .500 | |||||||
| Caster (Degrees) (2) | 1.0 ± 5/8 | 1.00 ± .625 | |||||||
| Toe-In (Degrees) | 1/8 ± 1/8 | .125 ± .125 | |||||||
| Toe-In (Inches) | 1/16 ± 1/16 | .062 ± .062 | |||||||
|
|||||||||