Adaptive Learning (ECM "B")

NOTE: Adaptive learning applies only to ECM "B". When selecting ADAPTIVE LEARNING, channel 01, the ECM executes the same operations as in ENGINE BASIC SETTING. Channel 01 is for CO level adjusting. Channel 02 has no function. On vehicles with ECM coding 000 and 008, if stored adaptation values are changed by inputting other values, engine management system will not be affected. See ECM ENCODING.

Select function 10, channel 01. Stored adaptation value of 128 will be displayed. Press right arrow button to advance sequence and allow adaptation values to be inserted. Press "1" button to decrease adaptation value, leaning the CO content. Press "3" button to increase adaptation value, richening the CO content. Value should be 110-150.
Appropriate adaptation value and 10 measurements are displayed as in READING MEASURING BLOCK (ECM "B"), display group 00. If modified adaptation value will not be stored, return to previous display by pressing "C" button. If storing adaptation value, input adaptation value as 00XXX (last 3 digits represent value).